MAPEI Mapefix VE SF styrene-free chemical anchor 300ml
MAPEI Mapefix VE SF styrene-free chemical anchor 300ml
Couldn't load pickup availability
MAPEI Mapefix VE SF 300 ml – styrene-free vinylester chemical anchor for heavy-duty fastenings
Mapefix VE SF is a styrene-free injection mortar based on vinylester resin for chemical anchoring with high load-bearing capacity. It is used for fastening threaded rods, reinforcing bars, and anchor sleeves in concrete and masonry – and can even be used underwater.
Thanks to its ETA approval (Option 1 for non-cracked concrete), it is suitable for structural fastenings. Its styrene-free formulation makes it low-odor and well-suited for interior use.
Scope of delivery: 300 ml cartridge, available individually or in a box of 12 cartridges. Color: light gray.
Advantages of Mapefix VE SF
- Styrene-free and low-odor
- European Technical Assessment (ETA), Option 1 for non-cracked concrete
- High load-bearing capacity – compressive strength approx. 100 N/mm²
- Application from −10 °C to +35 °C
- Also suitable for damp and water-filled drill holes as well as underwater
- Can be applied with standard cartridge guns
Typical areas of application
- Anchoring of threaded rods and reinforcing bars
- Fastenings in non-cracked concrete
- Solid masonry and hollow masonry (with sieve sleeve)
- Aerated concrete, natural stone, and wood
- Fastening of railings, brackets, awnings, machinery, and steel structures
Technical data
- Base: Vinylester resin, styrene-free, 2-component (cartridge with static mixer)
- Application temperature: −10 °C to +35 °C
- Working time / curing time at +20 °C: approx. 6 minutes / approx. 45 minutes (in wet drill holes approx. 90 minutes)
- Working time / curing time at +5 °C: approx. 25 minutes / approx. 2 hours
- Compressive strength: approx. 100 N/mm²
- Color: light gray
Application of Mapefix VE SF
1. Drill the hole
Drill the hole to the specified diameter and required depth. Core drilling is not suitable.
2. Clean the hole
Thoroughly blow out and brush the drill hole until it is free of drilling dust – cleaning is critical for load-bearing capacity.
3. Prepare the mortar
Screw on the static mixer and insert the cartridge into a cartridge gun. Discard the first 3 strokes until the mortar emerges as a uniform gray mixture.
4. Fill the hole
Fill the drill hole from the bottom up to approx. 2/3 of its depth without air bubbles. In hollow bricks, use a sieve sleeve.
5. Set the anchor
Insert the threaded rod or reinforcing bar with a slight twisting motion until the setting depth is reached. Adjust within the working time and only apply load after the full curing time.
Note: All information is taken from the technical data sheet of the manufacturer MAPEI. For structural fastenings, the design values of the ETA are authoritative. Please observe the current product and safety data sheets, which can be downloaded at the bottom of this page, before use.
Manufacturer's specifications
Manufacturer's specifications

FAQ
How long does shipping take?
Your order will typically be shipped within three to five business days. In rare cases, however, there may be slight delays. If this happens, our service team will inform you immediately!
How much are the shipping costs?
A detailed overview of shipping costs can be found HERE . These are calculated at checkout and vary depending on the product, weight, and delivery address.
Can I pick up my order myself?
Yes, you can select the "Collection" delivery option at checkout. We will inform you by email as soon as your order is in stock and ready for collection. Our regular collection times are Monday to Friday from 2 pm to 4 pm .
Can I also get specific advice on a product?
Yes, of course! Feel free to contact our in-house expert HERE !
Can I register as a business customer?
Yes! As a business customer, you can request special access HERE via our registration form . With this access, you'll benefit from net prices , attractive discounts on selected product groups , and individual pricing for bulk orders.
Get great deals & news with our newsletter!
By subscribing to the newsletter, you agree that we may process your information in accordance with our privacy policy .