MARIS Mariseal 250W Water-based PU Liquid Membrane 20kg
MARIS Mariseal 250W Water-based PU Liquid Membrane 20kg
Couldn't load pickup availability
MARIS Mariseal 250W 20 kg – water-based, permanently elastic polyurethane liquid waterproofing
Mariseal 250W is a single-component, cold-applied, water-based polyurethane waterproofing (PU dispersion). It forms a seamless, water-repellent membrane for roofs and concrete structures – with low VOC content and no ADR hazardous goods classification.
When used in a system with Aquaprimer, fabric reinforcement, and a Mariseal 400W topcoat, Mariseal 250W is rated for a 25-year service life (W3) according to ETA 21/0249.
Scope of delivery: 20 kg plastic bucket, light grey color.
Advantages of Mariseal 250W
- Water-based and low-emission – not classified as ADR hazardous goods
- Seamless, water-repellent membrane without joints
- Crack-bridging according to EN 14891
- Mechanical properties from −30 °C to +90 °C
- Water vapor permeable, walkable
- ETA 21/0249 (W3, 25 years), EN 1504-2
Typical application areas
- Flat roofs
- Protection of polyurethane foam insulation materials
- Waterproofing and protection of concrete structures
Technical data
- Base: single-component, aromatic PU dispersion (water-based)
- Tensile strength: > 4.5 N/mm²
- Elongation at break: > 300 %
- Hardness: > 65 Shore A
- Adhesion to primed concrete: > 1.5 N/mm²
- Walkable (light): after 18–24 hours
- Final curing: after 7 days
- Max. dry film per layer: 0.6 mm
- Application temperature: +5 °C to +35 °C
- Shelf life: 18 months from production, store frost-free
Consumption
Consumption is approx. 1.4–2.8 kg/m² in two or three layers. The ETA system requires 2.8 kg/m² with fabric reinforcement. A 20 kg container is therefore sufficient for approx. 7–14 m².
Application of Mariseal 250W
1. Prepare the substrate
Must be clean, dry (max. 8 % moisture), and structurally sound; new concrete must be at least 28 days old. Remove loose debris, grease, oil, and dust; sand down tiles and metal surfaces. Minimum slope of 2% required.
2. Priming
Prime absorbent and non-absorbent substrates with MARIS Aquaprimer and allow to cure.
3. Application and reinforcement
Stir well and apply using a roller, brush, squeegee, or airless sprayer. Always reinforce joints, pipes, drains, and skylights with fabric (MARISEAL Fabric); full-surface reinforcement with 5–10 cm overlap is recommended.
4. Additional layers
Apply two to three layers at intervals of 18–24 hours, max. 0.6 mm dry film per layer. Seal joints with MARIS Mariflex PU 30.
5. Topcoat
According to the manufacturer, apply one to two layers of Mariseal 400W as a UV- and abrasion-resistant topcoat, especially for dark colors.
Note: Do not apply at temperatures below +5 °C or if rain, dew, or frost is expected within 48 hours. All information is based on the manufacturer's technical data sheet, Maris Polymers (as of 12/2024). Please refer to the current product and safety data sheets, which can be downloaded at the bottom of this page.
Manufacturer's specifications
Manufacturer's specifications
Product data sheets
Product data sheets



Ware Alles klar gute
Alles in Ordnung.
Von der Bestellung bis zur Lieferung alles tiptop!
Bisher macht Mariseal 250w einen sehr guten Eindruck, habe aber erst den ersten Anstrich damit gemacht. Ein zweiter erfolgt in den nächsten Tagen. Lässt sich aber super verarbeiten.
FAQ
How long does shipping take?
Your order will typically be shipped within three to five business days. In rare cases, however, there may be slight delays. If this happens, our service team will inform you immediately!
How much are the shipping costs?
A detailed overview of shipping costs can be found HERE . These are calculated at checkout and vary depending on the product, weight, and delivery address.
Can I pick up my order myself?
Yes, you can select the "Collection" delivery option at checkout. We will inform you by email as soon as your order is in stock and ready for collection. Our regular collection times are Monday to Friday from 2 pm to 4 pm .
Can I also get specific advice on a product?
Yes, of course! Feel free to contact our in-house expert HERE !
Can I register as a business customer?
Yes! As a business customer, you can request special access HERE via our registration form . With this access, you'll benefit from net prices , attractive discounts on selected product groups , and individual pricing for bulk orders.
Get great deals & news with our newsletter!
By subscribing to the newsletter, you agree that we may process your information in accordance with our privacy policy .